CINT1200

200W Single Output

Industrial Series

www.slpower.com

CINT1200 REV 1.4 12-JUNE-13

2

Inrush Current

264Vac, cold start: will not exceed 55A

Overtemperature

Protection

Sensing transformer temperature, 165°C at

full load, latching type, requires input power

recycling to reset.

Input Fuses

F1, F2: 3.15A, 250Vac fuses provided on all

models

Overload Protection

120 to 150% of rating, Hiccup Mode

Earth Leakage

Current

<500µA@264Vac, 60Hz, NC; <1mA SFC

Short Circuit

Protection

Hiccup Mode, auto recovery.

Efficiency

88% typical

Overvoltage

Protection

OVP latch, see models chart for trip range.

Output Power

200W continuous, with 100 lfm airflow, 180W

convection cooled – See chart for specific

voltage model ratings.

Switching Frequency

PFC: Fixed, 65kHz

Main Converter: Variable 35-200kHz, 65-

70kHz at full load.

Transient

Response

500µS typical, return to 0.5% of nominal, 50%

load step. ∆i/∆t: <0.2A/µS. Max Voltage

Deviation = 3%

Isolation

Input-Output:

4000Vac

Input-Ground:

1800Vac

Output-Ground: 1500Vac

Ripple and Noise

0.5%rms, 1% pk-pk, see chart.

Operating

Temperature

-10°C to +70°C

Start Up at -40°C, full load

Output Voltage

See chart

Temperature

Derating

Derate output power linearly above 50°C to

50% at 70°C

Voltage

Adjustability

Fixed Output

Storage Temperature

-40°C to +85°C

Minimum Load

Not required

Altitude

Operating: -500 to 10,000 ft.

Non-operating: -500 to 40,000 ft.

Total Regulation

+/- 3% combined line, load and initial setting.

Relative Humidity

5% to 95%, non-condensing

Vibration

Operating: 0.003g²/Hz, 1.5grms overall, 3

axes, 10 min/axis

Non-Operating: 0.026g²/Hz, 5.0grms overall,

3 axes, 1 hr/axis

Shock

Operating: Half-sine, 20gpk, 10ms, 3 axes, 6

shocks total

Non-Operating: Half-sine, 40 gpk, 10 ms, 3

axes, 6 shocks total

Dimensions

W: 3.0” x L: 5.0” x H: 1.3”

Safety Standards

EN/CSA/UL/IEC 60950-1, 2nd Edition

Weight

325g

MTBF

401,000 hours, 25°C, 110Vac

Output vs. Temperature Derating Curve

180W convection cooled and 200W continuous with 100 LFM airflow, derate output power to 50% at 70°C.