UNIVERSAL INPUT HARMONIC CORRECTION

AC-DC MEDICAL AND IEC APPLICATION OPEN FRAME SINGLE &

MULTI-OUTPUT 150 WATTS INTERNAL SWITCHING POWER

SUPPLIES TPIMP151 SERIES

FEATURES:

5” X 3”* X 1.38” COMPACT SIZE

ACCOMMODATE UNIVERSAL AC SOURCES

MEET IEC 61000-3-2 HARMONIC

CORRECTION

MEET UNIVERSAL SAFETY STANDARDS

EMI MEET CISPR EN 55022/EN 55011 & FCC

CLASS B CONDUCTED

CE MARKING COMPLIANCE

SPECIFICATION

INPUT SPECIFICATION

Input Voltage: Typ. 90-264Vac with PFC.

Input Connector: V-M connector.

Input Frequency: 47-63Hz.

Inrush Current: 9.3-11.3Arms @230Vac.

Input Current: Typ. 2.2A @115Vac, 0.9A @230Vac.

Dielectric Withstand: Meet IEC 60950-1.

EMI: Meet CISPR EN 55022 & FCC Class B conducted.

Meet CISPR EN 55011 & FCC Class B conducted.

Hold-up Time: Typ. 90mS @115Vac & 230Vac.

Power Factor & Harmonic Correction:

Meet IEC 61000-3-2, PF typ. 0.99 @ full load.

Over Temperature Protection: Installed.

Leakage Current: 0.40-0.50mA @230Vac touch current.

OUTPUT SPECIFICATION

Output Voltage: See Ratings Chart.

Output Current: See Ratings Chart.

Output Connector: V-M connector.

Output Wattage: Max. 150 watts.

Line Regulation: Typ. 1.0%.

Load Regulation: Single O/P VO1 ±3.0%.

Dual O/P VO1 ±3.0% VO2 ±1.0%

Triple O/P VO1 ± 3.0% (± 8% for 3.3V), VO2/VO3 ±3.0%.

Quad O/P VO1/VO2/VO3/VO4 ±3.0%

Noise & Ripple: Typ. 1.0-2.0% peak to peak.

OVP: Built-in at VO1 and VO2.

Adjustability: Available at VO1 and VO2.

Overload Protection (OLP):

Fully protected against output overload and short circuit.

OLP set at about 125-150% rating output wattage.

Consult the factory for OLP setting.

GENERAL SPECIFICATION

Efficiency: Typ. 76-80% various with output.

Switching Frequency: 68K Hz.

Circuit Topology: Single Fixed frequency forward circuit.

Dual/Triple/Quad: Fixed freq. flyback circuit.

Transient Response: Output voltage returns in less than

14.8-25.2mS following a 25% load change.

Safety Standard: IEC 60950-1 Class I for IEC use.

IEC 60601-1 Class I for Medical use.

Operating Temperature: 0 to +50°C under 30 CFM

forced air cooling for full load.

Storage Temperature: -20 to +85°C.

Temperature Coefficient: Typ. 0.04% /°C.

Cooling: Requested 30 CFM forced air flow for full load.

Construction: U-bracket format.

Power Density: 6.52-7.24 Watts / Cubic Inch .

Note: Due to requests in market and advances in technology, specifications subject to change without notification.

Total Power International, Inc. Toll Free: 877-646-0900(US) PH# 978-453-7272 www.total-power.com

Total Power International, Inc.