AS-MLV-P2 datasheet(18/24 Pages) AMSCO

поискавой системы для электроныых деталей

AS-MLV-P2 датащи(PDF) 18 Page - ams AG

18 / 24 page

Page 18

ams Datasheet

Document Feedback

[v1-01] 2015-Oct-12

AS-MLV-P2 − Soldering Information

Handling

The AS-MLV-P2 should be handled carefully, shear stress should

be avoided. The sensor is protected against particles and liquids

by a membrane. This membrane shall not be removed or

touched.

Soldering Instructions

The AS-MLV-P2 can be soldered in standard reflow soldering

ovens. The reflow oven shall be purged with clean air. Other

gases must be avoided. For the lead free reflow process a

standard process IPC/JEDEC J-STD-020 with peak temperature

up to maximum 230°C on surface is suggested. See Figure 19

for more detailed description.

Note(s): The device shall be kept clear of liquids; therefore a

PCB washing process must be avoided in any case.

For manual soldering: contact must be limited to 5 seconds at

a maximum temperature of 350°C.

Figure 19:

Solder Reflow Graph

Soldering Information

Вашему бизинису помогли Аллдатащит? [ DONATE ]
Что такое Аллдатащит \| реклама \| контакт \| Конфиденциальность \| Ссылка на техническое описание \| обмен ссыками \| поиск по производителю All Rights Reserved©Alldatasheet.com
Mirror Sites English : Alldatasheet.com \| English : Alldatasheet.net \| Chinese : Alldatasheetcn.com \| German : Alldatasheetde.com \| Japanese : Alldatasheet.jp Russian : Alldatasheetru.com \| Korean : Alldatasheet.co.kr \| Spanish : Alldatasheet.es \| French : Alldatasheet.fr \| Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com \| Polish : Alldatasheet.pl \| Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in \| Mexican : Alldatasheet.com.mx \| British : Alldatasheet.co.uk \| New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com \| icmetro.com

Вашему бизинису помогли Аллдатащит? [ DONATE ]

Family Site : ic2ic.com | icmetro.com