 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
AS5403D-HTST датащи(PDF) 19 Page - ams AG |
|
|
|||||||||||||||||||||||||||||
AS5403D-HTST датащи(HTML) 19 Page - ams AG |
|
|
19 / 66 page  ams Datasheet Page 19 [v1-06] 2015-Aug-28 Document Feedback AS5403A/D/E − Operation The AS5403 operates at 5V ±10%, using one internal Low-Dropout (LDO) voltage regulator. For operation, the 5V supply is connected to pin VDD. While VDD3 (LDO output) must be buffered by 1μF capacitor, the VDD requires a 1μF capacitor. All capacitors (low ESR ceramic) are supposed to be placed close to the supply pins (see Figure 20).The VDD3 output is intended for internal use only. It must not be loaded with an external load. Figure 20: Connections for 5V Supply Voltages Note(s) and/or Footnote(s): 1. The pin VDD3 must always be buffered by a capacitor. It must not be left floating, as this may cause instable internal supply voltages which may lead to larger output jitter of the measured angle. The supply pin is over voltage protected up to 18V. In addition the device has a reverse polarity protection. Operation 4. 5 - 5.5V CVDD3 TEST SCS SCLK NC SDI SDO TEST NC NC VDD VDD3 GND OUT DSW CVDD { SPI }Outputs |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
