02/13/2015

012701 - HPL-ED2014 V9.0 EN

5 / 12

2

60 V

A

2.5

3

100 V

A

1.5

3

220 V

A

0.5

Conv. thermal current

A

10

Control circuit reliability

Failure rate λ

 

 

 

AC-15

DC current

 

 

 

Notes

 

 

Switch-on and switch-off conditions based on DC-13, time constant as specified

Short-circuit rating without welding

 

 

 

Maximum overcurrent protective device

 

 

 

Short-circuit protection only

 

 

PKZM0-4

Short-circuit protection maximum fuse

 

 

 

500 V

 

A gG/gL 6

500 V

 

A fast 10

 

W

0.3

Data￿for￿design￿verification￿according￿to￿IEC/EN￿61439

Technical data for design verification

 

 

 

Rated operational current for specified heat dissipation

A

22

Heat dissipation per pole, current-dependent

W

0.68

Equipment heat dissipation, current-dependent

W

0

Static heat dissipation, non-current-dependent

W

2.6

Heat dissipation capacity

W

0

IEC/EN 61439 design verification

 

 

 

10.2 Strength of materials and parts

 

 

 

10.2.2 Corrosion resistance

 

 

Meets the product standard's requirements.

10.2.3.1 Verification of thermal stability of enclosures

 

 

Meets the product standard's requirements.

10.2.3.2 Verification of resistance of insulating materials to normal heat

 

 

Meets the product standard's requirements.

10.2.3.3 Verification of resistance of insulating materials to abnormal heat

and fire due to internal electric effects

 

 

Meets the product standard's requirements.

10.2.4 Resistance to ultra-violet (UV) radiation

 

 

Meets the product standard's requirements.

10.2.5 Lifting

 

 

Does not apply, since the entire switchgear needs to be evaluated.

10.2.6 Mechanical impact

 

 

Does not apply, since the entire switchgear needs to be evaluated.

10.2.7 Inscriptions

 

 

Meets the product standard's requirements.

10.3 Degree of protection of ASSEMBLIES

 

 

Does not apply, since the entire switchgear needs to be evaluated.

10.4 Clearances and creepage distances

 

 

Meets the product standard's requirements.

10.5 Protection against electric shock

 

 

Does not apply, since the entire switchgear needs to be evaluated.

10.6 Incorporation of switching devices and components

 

 

Does not apply, since the entire switchgear needs to be evaluated.

10.7 Internal electrical circuits and connections

 

 

Is the panel builder's responsibility.

10.8 Connections for external conductors

 

 

Is the panel builder's responsibility.

10.9 Insulation properties

 

 

 

10.9.2 Power-frequency electric strength

 

 

Is the panel builder's responsibility.

10.9.3 Impulse withstand voltage

 

 

Is the panel builder's responsibility.

10.9.4 Testing of enclosures made of insulating material

 

 

Is the panel builder's responsibility.

10.10 Temperature rise

 

 

The panel builder is responsible for the temperature rise calculation. Eaton will

provide heat dissipation data for the devices.

10.11 Short-circuit rating

 

 

Is the panel builder's responsibility. The specifications for the switchgear must be

observed.

10.12 Electromagnetic compatibility

 

 

Is the panel builder's responsibility. The specifications for the switchgear must be

observed.

10.13 Mechanical function

 

 

The device meets the requirements, provided the information in the instruction

leaflet (IL) is observed.