Product Datasheet

www.Applied-Motion.com

HT23-548

NEMA 23 High Torque Step Motor

1pc. - 98.00

50pc. - 73.50

Product Features

2-phase hybrid step motor

High torque design

Standard NEMA 23 dimensions

Optimized for high bus voltage

Applied Motion Products, Inc.

404 Westridge Dr.

Watsonville, CA 95076, USA

1-800-525-1609

Tel (831) 761-6555

Fax (831) 761-

6544

Product Description:

The HT23-548 two-phase stepper motor is designed for use with the STAC6 series of stepper drives (120 VAC

input versions only) and is suitable for a wide range of motion control applications. The motor comes with an

integral 10 ft shielded cable and a preassembled drive connector for easy connection to a STAC6 drive.

When not used with STAC6 drives, the preassembled drive connector can be removed to reveal 8 motor leads

plus 1 ground lead. The 8 motor leads can be connected in one of three ways to the step motor drive of your

choice: bipolar series (required for STAC6 drives), bipolar parallel, or unipolar.

Note: The HT23-548 step motor has been superseded by theHT23-552 step motor for use in all new applications

with STAC6 stepper drives.

Description