| поискавой системы для электроныых деталей |
|
AXP202 датащи(PDF) 23 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
AXP202 датащи(HTML) 23 Page - List of Unclassifed Manufacturers |
|
23 / 48 page ![]() VQ.QW WPPIQPWE CC Confidential Page 23/48 www.x-powers.com Single Cell Li-Battery PWM Charger and Power System Management IC AXP202 AXP202 will automatically detect the battery presence, record the result in registers (refer to REG01H) and release IRQ13, IRQ14. The battery detection can be enabled and disabled by Host. (Refer to register REG32H.) 9.4 Backup Batttery AXP202 supports backup battery charge and discharge. When no main power (BAT/ACIN/VBUS) is available, LDO1 will choose the backup battery to support the operation of some circuits, such as the system real-time clock, etc. When there is a main power, REG35H[7] can be set to charge the backup battery, whose target voltage is 3.0V by default (adjustable via REG35H[6:5]) and charge current is 200uA by default ( adjustable via REG35H[1:0]). 9.5 Multi-Power Outputs The following table has listed the multi-power outputs and their functions of AXP202. Output Path Type Default Voltage Application Examples Drive Ability DCDC2 BUCK Configurable 1.25Vcore 1800 mA DCDC3 BUCK Configurable 2.5Vddr 1000 mA LDO1 LDO Configurable RTC 30 mA LDO2 LDO Configurable Analog/FM 200 mA LDO3 LDO Configurable 1.3V PLL 200 mA LDO4 LDO Configurable 1.8V HDMI 200 mA LDO5 LDO Configurable Vmic 50 mA AXP202 comes with two synchronous step-down DC-DCs, five LDOs, as well as multiple timing and controlling methods. The work frequency of DC-DC is 1.5MHz by default, which is adjustable via registers. External small inductors and capacitors can be connected as well. In addition, both DC-DCs can be set in PWM mode or auto mode (automatically switchable according to the AXP202 load). See register REG80H. DC-DC2/3 DCDC3 output voltage ranges from 0.7 V to 3.5V,and output voltage of DCDC2 is ranged from 0.7-2.275V,which can be programmed via registers.(refer to “ register REG23H 27H”). DCDC2/3 output capacitor is recommended to use small ESR ceramic capacitors above 10uF X7R; |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |