Micropac Industries

cannot assume any responsibility for any circuits shown, or represent that they are free from patent infringement.

Micropac

reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Micropac Industries, Inc.

 905 E. Walnut St., Garland, TX 75040  (972) 272-3571  Fax (972) 494-2281

www.micropac.com

E-MAIL:

microsales@micropac.com

12/18/2013 Rev

G

Pg. 1 of 9

IPC01

SERIES

BY MICROPAC

TM

Industrial Power Controller

IPC01 AC and DC ISOLATED OUTPUT

Micropac

Features:



UL508 and CSA C22.2 NO. 14-10 Recognized, (File number E354703)



Patent Pending – Power Control, Monitoring, and Load Protection



All solid-state circuitry, with no moving parts to wear, ensures a long life.



Soft start for reduced EMI.



High efficiency with less than 0.8V drop at full load.



Compact panel mount “Hockey Puck” style package.



No Output current de-rating is required for base plate temperatures of -40ºC to +80ºC.



SPST, normally open power controller.



UL94V-0 approved clear IP20 touch safe protection cover.





TTL / CMOS compatible Switch Status.



AC devices designed for inductive load power factors to 0.75.



AC devices designed with integrated load switching transient suppression.

Description:

The IPC combines both relay and circuit breaker functions.

The Isolated IPC is mechanically similar to the standardized

industrial Solid State Relay. The functions include Soft Start

protection that provides

circuit breaker function to MIL-STD-1760E and load status

signaling indicating switch output conditions of ON, OFF and

Overload.

Inductive and optical coupling between the input circuits and

output provides isolation of 1,500 VRMS. Power MOSFET

output switches provide soft start and low ON voltage drop for

improved thermal characteristics. The input Control logic

Output current is monitored to control outputs during over-

conditions include Over-Load and Shorted Output during Turn-

On. Open-collector Output Status indicates the state of the

Output Switch MOSFET load driver. The output remains OFF

until the short is removed and the unit’s control line is toggled

OFF and back ON. Locking the output OFF on an error

condition prevents damage to the controller and further system

damage caused by the short circuit. Output Status is an Active

Low (Open Collector) for Controller OFF or Tripped conditions

and High (pull up resistor) for a normally ON output state.

The IPC is designed for rated current over a Baseplate

Temperature Range of -40ºC to +85ºC. This includes the

operations of Soft Start at Command ON and Trip OFF on Over

Load or Fault Conditions.

Applications:

 Aerospace Ground Support Equipment.

 Industrial and Commercial Lighting Systems.

 Commercial Test Equipment.

 Manufacturing Equipment.

 Energy Exploration Systems and Equipment.

 Communications Systems and Plants.

 Aircraft and Avionics Systems.

 Automation Equipment.

 Fabrication Equipment.

 Vending Machines.

 Selective Power Distribution.

 Laboratory Test Systems.

 Food Processing.