HIP4086, HIP4086A

14

FN4220.10

March 27, 2015

Submit Document Feedback

About Intersil

Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products

address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.

For the most updated datasheet, application notes, related documentation and related parts, please see the respective product

information page found at www.intersil.com.

You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.

Reliability reports are also available from our website at www.intersil.com/support

Revision History

The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make sure you

have the latest Rev.

DATE

REVISION

CHANGE

March 27, 2015

FN4220.10

Added AN1829, “HIP4086 3-Phase BLDC Motor Drive Demonstration Board, User Guide” bullet to the related

literature section on page 1.

On page 3:

In the Pin Configuration updated typo for Pin 17 Pin Name from “AHC” to “AHO”.

In the Pin Description table:

Updated RDEL and UVLO Description to reference the correct Figures.

RDEL - from “Figure 17” to “Figure 18” and UVLO - from “Figure 18”to “Figure 19”.

Updated typo-AHS pin number from “15” to “18”.

Added “RDEL range10kΩ to 100kΩ” to the “Maximum Recommended Operating Conditions” on page 5.

Updated the About Intersil verbiage.

January 28, 2013

FN4220.9

Corrected following typo in the second paragraph of page 1:

From: (0.5ms to 4.5ms)

To: (0.5µs to 4.5µs)

September 27, 2012

FN4220.8

Removed evaluation board from “Ordering Information” and “Related Literature” since it is inactive.

June 1, 2011

FN4220.7

Added alternate parameters for HIP4086A in DC Electrical Specifications Table Supply Currents on page 5.

Added to Charge Pump Figures 10 and 11 in Typical Performance Curves "HIP4086 Only"

March 18, 2011

-Converted to new Intersil datasheet template.

-Changed Title from "80V, 500mA, 3-Phase Driver" to "80V, 500mA, 3-Phase MOSFET Driver".

-Rewrote description on page 1 by adding HIP4086A and stating the differences between parts.

-Updated “Ordering Information” on page 4 by adding part number HIP4086AABZ and Eval Board. Added MSL

note. Removed obsolete part HIP4086AP.

-Updated “TYPICAL APPLICATION” on page 1.

-Added “CHARGE PUMP OUTPUT CURRENT” on page 1.

-Updated “Features” and “Applications” section on page 1.

-Added “” on page 1.

-Updated “Block Diagram” on page 2 by adding color and notes.

-Updated “Thermal Information” and notes on page 5.

-Added “Boldface limits apply..” to common conditions of Electrical Specifications tables. Added Note 9 to MIN

and MAX columns of Electrical Specifications tables.

-Updated all timing diagrams for better clarification on page 7.

-Added “Functional Description”, “Application Information” and “General PCB Layout Guidelines” sections

beginning on page 10.

-Updated Package Outline Drawing M24.3 by removing table listing dimensions and putting dimensions on

drawing. Added Land Pattern.

-Added “Revision History” and “About Intersil” to page 14.

July 26, 2004

FN4220.6

Added Pb-Free parts to “Ordering Information” on page 4.

February 18, 2003

FN4220.5

Revised “Pin Descriptions” on page 3.

Revised “Low Level Input Current” specs on page 6.

May, 1999

FN4220.4

Initial Release.