36-40GHz Very Low Noise Amplifier

CHA2391

Ref. : DSCHA23912240 -28-Aug.-02

7/8

Specifications subject to change without notice

Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE

Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09

Chip Biasing

This chip is a two stage amplifier, and flexibility is provided by the access to number of pads.

The internal DC electrical schematic is given in order to use these pads in a safe way.

IN

OUT

Vg 1

Vg 2

25

50

Vd

Vds1

Vds2

Not exceed Vds = 3.5Volt

( internal Drain to Source voltage ).

We propose two standard biasing:

Low Noise and low consumption:

Vd = 3.5V and Id = 30mA.

Low Noise and high output power:

Vd = 4.0V and Id = 45mA. ( A separate access to

the gate voltages of the first and the output stage is provided. Nominal bias is obtained for a

typical current of 30mA for the output stage and 15 mA for the first stage. The first step to

bias the amplifier is to tune the Vg1 = -1V and Vg2 to drive 30mA for the full amplifier. Then

Vg1 is reduced to obtain 45 mA of current through the amplifier.