The LonPoint Modules are products designed to integrate

®

devices, into cost-effective, interoperable, control systems for

building and industrial applications. In contrast to traditional

control networks, which use closed islands of control linked

with proprietary gateways, the LonPoint Modules offer an open

distributed system architecture in which every device performs

some control processing and can be accessed from any location

in the network. Distributing the processing throughout the

network and providing open access to every device lowers the

overall installation and life cycle costs, increases reliability by

minimizing single points of failure, and provides the flexibility

to adapt the system to a wide variety of applications.

The system consists of the LonPoint Interface, Scheduler,

Data Logger, Router Modules, LonPoint Application Programs,

and LNS DDE Server. The LPR Router Modules may be used

LPR-10 Modules

(ANSI/EIA-709.1) routers that can interface two different

twisted pair channels (e.g., a high speed 1.25Mbps TP/XF-

1250 backbone and a TP/FT-10 free topology channel), manage

devices, or increase the amount of cabling in a system.

LPR Routers can be installed as repeaters, configured

routers, or learning routers.

Models 42100R, 42101R, 42102R, 42103R, 42104R, and

42105R are compliant with the European Directive

2002/95/EC on the restriction of the use of certain hazardous

substances (RoHS) in electrical and electronic equipment.

Using the LonMaker tool, the user configures and commis-

sions the LPR Routers and other LonPoint modules, as well as

interoperable, distributed control system. Network design and

configuration is simplified by the Visio

LonMaker tool, which can both import and export AutoCAD

®

files and generate as-built documentation.

A unique, two-piece design allows pre-wiring and cable

testing by an electrician prior to installation of the electronics;

technician time can be reserved for tasks such as node configu-

ration. Power and network wiring are “looped” through the

base plate, providing the ability to replace modules by hot-

plugging without disrupting the operation of the two network

channels.

LPR Router Modules

Models 42100R, 42101R, 42102R, 42103R, 42104R, and 42105R

LonPoint Interface

Model and Software

Revision

LPR MODEL 42100˚˚ID NUMBER

MODEL 42100 972

SW VERSION 1 .0

ID NUMBER

LPR

LISTED 178K

ENERGY MANAGEMENT

EQUIPMENT SUBASMBLY

LPR MODEL 42100˚˚ID NUMBER

UL

Service

Switch

Service

LEDs

Network A

Network B

Power LED:

Power On: Illuminated

Continuously

Peel-Off Code 39

Format Bar Code of

LonPoint Interface

Neuron Chip ID

Number

Network Access Jacks; use

with Echelon PCC-10 Cable

Model 78303

Packet Activity LED

Router Transferring

Packets: Flashing

Network A

Network B

M

Router for TP/FT-10, TP/XF-78, and TP/XF-1250

M

Screw terminal wiring connections

M

16-30VAC or VDC operation

M

Network access from front panel jacks

M

Two-piece design cuts installation time, cost

M

U.L. Listed, cU.L. Listed, CE Mark, FCC

Six different models of LPR Routers are available:

Name

Model

Channel Types

LPR-10

42100R

TP/FT-10 to TP/FT-10

LPR-11

42101R

TP/FT-10 to TP/XF-78

LPR-12

42102R

TP/FT-10 to TP/XF-1250

LPR-13

42103R

TP/XF-78 to TP/XF-78

LPR-14

42104R

TP/XF-78 to TP/XF-1250

LPR-15

42105R

TP/XF-1250 to TP/XF-1250