3 HIGH SIDE AND 3 LOW SIDE DRIVER

Product Summary

600V max.

160 mA / 360 mA

10 - 20V

1.3 & 0.6

µs

Deadtime (typ.)

700

ns

Packages

www.irf.com

1

Typical Connection

(Refer to Lead Assignments for correct pin configuration). This/These diagram(s) show electrical connections only.

Please refer to our Application Notes and DesignTips for proper circuit board layout.

28-Lead PDIP

28-Lead

SOIC

44-Lead PLCC

w/o 12 Leads

Data Sheet No. PD60032 rev P

Features

Fully operational to +600V Tolerant to negative

transient voltage dV/dt immune

available in Lead-Free.

Description

The IR2131(J)(S) is a high voltage, high speed power

MOSFET and IGBT driver with three independent high and

low side referenced output channels. Proprietary HVIC

technology enables ruggedized monolithic construction.

Logic inputs are compatible with CMOS or LSTTL outputs,

down to 2.5V logic. A current trip function which termi-

nates all six outputs can be derived from an external cur-

rent sense resistor. A shutdown input is provided for a

customized shutdown function. An open drain

FAULT

signal is provided to indicate that any of the shutdowns has

occurred. The output drivers feature a high pulse current

buffer stage designed for minimum driver cross-conduc-

tion. Propagation delays are matched to simplify use in high

frequency applications. The floating channels can be used

to drive N-channel power MOSFETs or IGBTs in the high

side configuration which operate up to 600 volts.