Features

3U 2-Slot AdvancedTCA

Reference Platform

with Advantech Shelf Manager support

ƒ 3U 2-slot 19" rackmount ATCA shelf with integrated server blades

ƒ 2 front slots with power distribution and cooling for up to 300W per slot

ƒ 2 rear transition module (RTM) slots

ƒ Supports two redundant Advantech Shelf Managers with Telco alarm signals

ƒ 40G ATCA-compliant backplane with cross-connected Base and Fabric

Interfaces, handles up to 10 Gbps and 3.125 Gbps per differential pair

ƒ Redundant AC and DC power options

ƒ Right-to-Left Push-Pull Cooling Mode

ƒ Hot swappable FRUs (blades, RTMs, fan trays, power modules, and ShMM)

ƒ PICMG 3.0 (AdvancedTCA Base Specification) Compliance

Introduction

Advantech’s Netarium™ series of ATCA reference systems are specifically targeted to help network equipment providers reach superior levels of performance over traditional rackmount

servers or appliances and extend their product range at the high end. The series represents a new generation of systems which offer higher performance, greater scalability and extreme

flexibility by using the latest 40 Gigabit Ethernet (40G) backplanes, switches and application blades. Advantech optimizes the systems to achieve the highest possible density at the

rack level, enabling a maximum number of processor cores, network ports and switching capacity.

Each system is tailored for customers to rapidly deploy in data communication markets for applications which require faster and deeper packet processing such as policy and

charging enforcement, network security, real-time traffic monitoring, load balancing, subscriber analytics and content optimization among others. As ATCA was designed to meet the

carrier-grade constraints of the telecom industry, the systems integrate the chassis, cooling, power distribution and shelf management into an off-the-shelf platform solution capable

of superior 5 NINES availability and reliability.

Netarium™-2v2, which supports Advantech’s SMM-5060 Advanced Shelf Management Module, providing IPMI2.0 and ATCA compliant shelf management, is the ultimate in entry

level flexibility. This 2-slot platform allows OEMs to redeploy common platform hardware which scales when needed. Based on the MIC-5333 it packs more processing power than

previous generation 6-slot systems. With an increase in miniaturization and performance at the blade level it is accompanied by a new concept at the mezzanine level to bring more

I/O and acceleration closer to the processing cores. With four FMM sites on each ATCA blade and RTM, the MIC-5333 integrated into the Netarium™-2 Reference System offers the

broadest flexibility in entry level system performance on ATCA.

Many different payloads can be integrated into Advantech Netarium™ systems and configured to address diverse industry applications. For more details on integrating a specific

configuration please contact your local sales representative.

Specifications

Number of slots

Front blades

2 ATCA compliant node blades

RTM’s

2 ATCA rear transition modules

Backplane

IPMB

Bussed (radial available on request)

Base interface

Dual star, 1000 Base-T

Fabric interface

Full mesh, 3.125Gbps or 10Gbps per differential pair

Cooling

Technology

Two front pluggable, hot swappable push-pull fan trays with N+1 redundant fans

(no degradation with a single fan failure)

Max. Capacity

>CPTA B.4, 300W/slot

Air filter

One hot swappable air filter on the right side of chassis

Accessibility

Front

ATCA blades, ShMC’s, front fan trays

Rear

RTM’s, PEM’s / AC PSU’s

Power

AC

Integrated dual, redundant AC power supplies, 850W

PSU cooling

Self cooled

DC feed

2 redundant, hot swappable PEMs w. integrated EMI filters

DC voltage

-36V to -72V (Nominal -48V)

Current rating

30A per feed

Shelf management

Full featured

Dual, redundant enhanced shelf managers based on Advantech SMM-5060

Interfaces

RMCP, SSH, SNMP, CLI, Web and serial interfaces

Telco alarm

Telco alarm signals, populated on each ShMM

Sensors

FRU presence, fan health, PSU health, temperatures, input voltages

Miscellaneous

ESD plug

Front and rear

Cable management

Front / rear cable trays (optional)

Physical Characteristics

Dimensions (H x W x D)

3U x 19" x 462 mm

Weight

10kg (chassis weight only)

RoHS

COMPLIANT

2002/95/EC

All product specifications are subject to change without notice

Last updated : 23-Jun-2014