Preliminary Datasheet

LP78071

LP78071 – 00 Version 1.0 Feb.-2014

PCB Layout Considerations

It is important to pay special attention to the PCB layout. The following provides some guidelines:

• To obtain optimal performance, the decoupling capacitor from Vin to GND and the output filter capacitors from OUT to GND

should be placed as close as possible to the LP78071, with short trace runs to GND pins.

• All low-current GND connections should be kept separate from the high-current charge or discharge paths from the battery.

Use a single-point ground technique incorporating both the small-signal ground path and the power ground path.

• The high-current charge paths into IN and from the OUT pins must be sized appropriately for the maximum charge current in

order to avoid voltage drops in these traces.