RF Micro Devices Inc.

7628 Thorndike Road, Greensboro, NC 27409-9421

DS150202

For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.

The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of

third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended

application circuitry and specifications at any time without prior notice.

11 of 13

RFSW6024

Pin Names and Descriptions

Pin

Name

Description

1

VDD

Supply Voltage

2

VCTL

Logic Control Input

3

RFC

RF Common Port

4

NC

No Internal Connection

5

VEN

Logic input for

putting switch in “all-off” state. Logic high for “all-off” state.

6

GND or NC

Ground or No Connection

7

GND or NC

Ground or No Connection

8

NC

No Internal Connection

9

RF1

RF Port 1

10

GND or NC

Ground or No Connection

11

GND or NC

Ground or No Connection

12

RF2

RF Port 2

13

NC

No Internal Connection

14

GND or NC

Ground or No Connection

15

GND or NC

Ground or No Connection

16

NC

No Internal Connection

EPAD

GND

RF and DC Ground: Must be soldered to EVB ground plane over a bed of vias

Note: RFMD recommends that the NC pins be grounded on the EVB to maximize isolation.