RFFC5072ATR13 datasheet(10/26 Pages) RFMD

10 / 26 page

10 of 26

RFFC5071A/2A

DS140110

7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com.

The modulation frequency is calculated according to the following formula:

Where MODULATION is a 2's complement number and FPD is the phase detector frequency.

Programming Information

The RFFC5071A and RFFC5072A share a common serial interface and control block. Please refer to the Register Maps and

Programming Guide which are available for download from http://rfmd.com/products/IntSynthMixer/.

Evaluation Boards

Evaluation boards for RFFC5071A and RFFC5072A are provided as part of a design kit, along with the necessary cables and

programming software tool to enable full evaluation of the device. Design kits can be ordered from www.rfmd.com or from local

RFMD sales offices and authorized sales channels. For ordering codes please see “Ordering Information” on page 26.

For further details on how to set up the design kits go to http://rfmd.com/products/IntSynthMixer/.

The standard evaluation boards are configured with 3.7GHz ceramic baluns on the RF ports and wideband transformers on the

IF ports. On the RFFC5071A evaluation board, mixer 1 is configured for down-conversion and mixer 2 is configured for up-con-

version. On the RFFC5072A evaluation board, mixer 2 is configured for down conversion.

FMOD

MODSTEP F

MODULATION

 2





RFFC5072ATR13 датащи(PDF) 10 Page - RF Micro Devices