2 of 8

RF2818

DS100714

7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical

support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.

Absolute Maximum Ratings

Parameter

Rating

Unit

3.6

V

20

mA

Maximum Input Power - CW,

+15

dBm

72

mW

Max Voltage on RF Output (Pin 8)

+5

V

150

°C

Storage Temperature

-65 to +150

°C

Operating Temperature

-40 to +85

°C

Parameter

Specification

Unit

Condition

Min.

Typ.

Max.

High Current Mode

Nominal Operating Conditions (unless other-

wise specified)

Gain (G)

12.5

14

dB

Noise Figure (NF)*

1.55

1.95

dB

Input P1dB Compressed Power

(IP1dB)

-6.0

dBm

Input 3rd Order Intercept Point

(2-tone at fc±2.5MHz)

+6

dBm

Input Return Loss (S11)

-7.5

dB

Output Return Loss (S22)

-14

dB

Reverse Isolation (S12)

-24

dB

Cell Band Rejection (Relative to

1575GHz at 827.5MHz

80

101

dBc

PCS Band Rejection (Relative to

1575MHz at 1885MHz)

70

74

dBc

Supply DC Current at Shutdown

710

mA

ISH (Shutdown Current)

0.40

uA

Caution! ESD sensitive device.

Exceeding any one or a combination of the Absolute Maximum Rating conditions may

cause permanent damage to the device. Extended application of Absolute Maximum

Rating conditions to the device may reduce device reliability. Specified typical perfor-

mance or functional operation of the device under Absolute Maximum Rating condi-

tions is not implied.

RoHS status based on EUDirective2002/95/EC (at time of this document revision).

The information in this publication is believed to be accurate and reliable. However, no

responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any

infringement of patents, or other rights of third parties, resulting from its use. No

license is granted by implication or otherwise under any patent or patent rights of

RFMD. RFMD reserves the right to change component circuitry, recommended appli-

cation circuitry and specifications at any time without prior notice.