UPD78323LP datasheet(49/86 Pages) NEC

49 / 86 page

µPD78323, 78324

INSTRUCTION SET

This chapter covers instruction operations.

For the operation codes and the number of instruction execution clock cycles, see

µPD78322 User’s Manual (IEU-1248).

(1) Operand representation format and description method

In each instruction operand column, enter the operand using the description method for the instruction operand

representation format (refer to the assembler specification for details). If two or more factors are included in the description

method column, select one factor. The capital alphabetic letters and +, -, #, $, ! and [ ] symbols are keywords and should

be described as they are.

In case of immediate data, describe appropriate numeric values or labels. When describing labels, make sure to describe

#, $, ! and [ ] symbols.

Table 8-1. Operand Representation and Description Method

R0, R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15

R0, R1, R2, R3, R4, R5, R6, R7

C, B

RP0, RP1, RP2, RP3, RP4, RP5, RP6, RP7

rp1

RP0, RP1, RP2, RP3, RP4, RP5, RP6, RP7

rp2

DE, HL, VP, UP

sfr

Special function register code (see Table 2-2)

sfrp

Special function register code (16-bit operation enable register; see Table 2-2)

RP0, RP1, RP2, RP3, RP4, RP5/PSW, RP6, RP7

post

(Two or more instructions can be described. Only PUSH and POP instructions can be

described for RP5 and only PUSHU and POPU instructions can be described for PSW.)

[DE], [HL], [DE+], [HL+], [DE-], [HL-], [VP], [UP]

; Register indirect mode

[DE+A], [HL+A], [DE+B], [HL+B], [VP+DE], [VP+HL]

; Based indexed mode

[DE+byte], [HL+byte], [VP+byte], [UP+byte], [SP+byte] ; Based mode

word[A], word[B], word[DE], word[HL]

; Index mode

saddr

FE20H to FF1FH Immediate data or label

saddrp

FE20H to FF1EH Immediate data (bit0 = 0) or label (for 16-bit operation)

$addr16

0000H to FDFFH Immediate data or label; relative addressing

!addr16

0000H to FDFFH Immediate data or label; immediate addressing

(Up to FFFFH describable by MOV instruction)

addr11

800H to FFFH Immediate data or label

addr5

40H to 7EH Immediate data (bit0 = 0)Note or label

word

16-bit immediate data or label

byte

8-bit immediate data or label

bit

3-bit immediate data or label

3-bit immediate data (0 to 7)

Note Do not make work access to bit0 = 1 (odd address).

Remarks

Although rp and rp1 have the same describable register names, they generate different codes.

r, r1, rp, rp1 and post can be described with absolute names (R0 to R15, RP0 to RP7) as well as functional

names (X, A, C, B, E, D, L, H, AX, BC, DE, HL, VP, UP (refer to Table 2-1 for details of the relationships

between the absolute and functional names).

Immediate addressing is enabled for all spaces. Relative addressing is only enabled from the first address

of the subsequent instruction to the range of –128 to +127.

mem

Representation

Format

Description Method

UPD78323LP датащи(PDF) 49 Page - NEC

UPD78323LP датащи(HTML) 49 Page - NEC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86

датащи скачать

ссылки URL