8

LTC1654

Rail-to-Rail Output Considerations

In any rail-to-rail DAC, the output swing is limited to

voltages within the supply range.

If the DAC offset is negative, the output for the lowest

codes limits at 0V as shown in Figure 2b.

Similarly, limiting can occur near full scale when the REF

(FSE) is positive, the output for the highest codes limits at

Offset and linearity are defined and tested over the region

of the DAC transfer function where no output limiting can

occur.

Figure 2. Effects of Rail-to-Rail Operation On a DAC Transfer Curve. (a) Overall Transfer Function (b) Effect of Negative

1654 F02

INPUT CODE

(b)

OUTPUT

VOLTAGE

NEGATIVE

OFFSET

0V

8192

0

16383

INPUT CODE

OUTPUT

VOLTAGE

(a)

(c)

INPUT CODE

OUTPUT

VOLTAGE

POSITIVE

FSE