UM1547 datasheet(16/51 Pages) STMICROELECTRONICS

16 / 51 page

AT command list

UM1547

16/51

DocID023232 Rev 5

3.10.2

Responses

If the coprocessor chipset is correctly connected, the output of the command gives infos

(versions and ID) about the coprocessor. Example:

•

CP Device Version: 0x03

•

CP Firmware Version: 0x01

•

CP Authentication protocol Major version: 0x02

•

CP Authentication protocol Minor version: 0x00

•

CP Device ID: 0x00000200

When the coprocessor is not connected or badly connected the output of the command is

CP Data Fail or CP Address Fail.

3.11

DefaultLocalName

The DefaultLocalName command is used to set the name of the device to the name that is

reported during device discoveries. By default, the ATn FW interface uses “Amp'ed UP!”.

Changing the name using this command will permanently change the local name, unlike the

LocalName command, specified hereafter.

3.11.1

Syntax

AT+AB DefaultLocalName [name]

Where [name] is a string for the new local name, case sensitive (up to 20 characters). The

space character is allowed; the name is assumed to be all text up to the end of the

command.

3.11.2

Responses

If the operation is successful, the response is:

AT-AB LocalNameOk

3.12

DeleteAutoReconnect

The DeleteAutoReconnect command is used to delete the reconnect feature

The device in the reconnection memory will be deleted, but the function will remain enabled,

and the settings will stay in effect. This setting is saved in NVM.

3.12.1

Syntax

At+ab DeleteAutoReconnect

3.12.2

Responses

If the operation is successful, the response is:

AT-AB DeleteAutoReconnectDone

UM1547 датащи(PDF) 16 Page - STMicroelectronics

UM1547 датащи(HTML) 16 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

датащи скачать

ссылки URL