| поискавой системы для электроныых деталей |
|
AN4141 датащи(PDF) 27 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN4141 датащи(HTML) 27 Page - STMicroelectronics |
|
27 / 42 page ![]() DocID023425 Rev 2 27/42 AN4141 HAL to StdPeriph_Lib list of changes 3.3.4 RST In the standard library, this IP is presented byone function only, RST_GetFlagStatus() , to check whether the specified RST flag is set or not. In the Hardware Abstraction Layer driver, this check is done by access registers. 3.3.5 PWR In addition to the low power API provided in the Hardware Abstraction Layer (file sleep.c), some additional/basic APIs are provided by the STM32W108xx standard library drivers. These APIs are summarized in the following table: 3.3.6 WDG The STM32W108xx microcontroller integrates a watchdog timer which can be enabled to provide protection against software crashes and ARM® Cortex-M3 CPU lockup. The following table provides an overview of the HAL vs StdPeriph_Driver functions that enable a standard use of the WDG features. The StdPeriph WDG API covers all the HAL ones, so the WDG API is removed from the HAL. Refer to section XXXXX. Table 11. STM32W108xx PWR driver overview StdPeriph_Driver API Functionality description PWR_DeInit() Deinitializes the PWR peripheral registers to their default reset values PWR_VREGStructInit() Fills each VREG_InitStruct member with its default value PWR_VREGInit() Initializes the VREG peripheral according to the specified parameters in the VREG_InitStruct PWR_GPIOWakeUpPinCmd() Enables or disables the GPIO WakeUp pin PWR_WakeUpFilterConfig() Enables or disables the WakeUp source filter PWR_WakeUpSourceConfig() Enables or disables the WakeUp method form low power mode PWR_FreezestateLVoutput() Enables or disables the freeze GPIO state LV output PWR_DeepSleepMode0Cmd() Enables or disables the deep sleep mode 0 when debugger is attached PWR_CoreWake() Wake core form a deep sleep 0 PWR_InhibitCSYSPWRUPACK() Disables the cortex-M3 system access to the ACK bit in the CSYSPWRUPACKSR register PWR_GetFlagStatus() Checks whether the specified PWR flag is set or not PWR_ClearFlag() Clears the PWR pending flags |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |