UM0894 datasheet(30/45 Pages) STMICROELECTRONICS

30 / 45 page

STM32W108xx kits utilities and software tools

UM0894

30/45

Doc ID 16999 Rev 6

STM32W108xx kits utilities and software tools

3.1

stm32w_flasher utility

The stm32w_flasher utility allows you to download a binary file into the STM32W108xx

application board. This utility comes with each RF software library package. To download a

binary image, follow these steps:

Where applicable, fit the application board jumper P2 on position 5-6 (power via USB).

Connect a mini USB cable to the application board mini-USB connector and to a PC

USB port.

Using the mouse, right-click on

My Computer, select Manage, Device Manager, and

open

Ports (COM & LPT) to display the related USB COMx port.

Open a DOS Window on your PC.

Go to the utilities folder which comes after the installation process.

Type the following command: stm32w_flasher –p <COMx> -r –f <file_name.bin/.s37>

where COMx is the virtual COM related to the connected application board, and

file_name.bin/.s37 is the application image to be downloaded.

Note:

You can also use the stm32w_flasher utility through the JTAG programmer for all the boards

which have a JTAG connector:

1. Fit the application board jumper P2 on position 5-6 (power via JTAG).

2. Plug the JTAG programmer to a PC USB port and to the board JTAG connector P4.

3. Open a DOS Window on your PC.

4. Go to the folder where the stm32w_flasher is located (tool or utility folder).

5. Type the following command: stm32w_flasher -f <file_name.bin/.s37> -r

3.2

Network analyzer

3.2.1

Perytons

To install the Perytons network analyzer, insert the related CD-ROM and follow the

installation instructions. To use the Perytons network analyzer, follow these steps:

Application board labeled as “Analyzer“: fit jumper P2 on position 5-6 (power via USB)

and connect to a PC USB port.

Open the Perytons tool (from Start, Programs).

For instructions about how to start a packet capture session, refer to the documentation

on the Perytons CD-ROM.

When a packet capture session is ongoing, the application board LEDs behave as follows:

●

When data is sent to the PC, LED D1 flashes for a short period.

●

LED D3 is the heartbeat LED.

A prebuilt analyzer binary image for Perytons is provided with each RF software library

package.

UM0894 датащи(PDF) 30 Page - STMicroelectronics

UM0894 датащи(HTML) 30 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

датащи скачать

ссылки URL