| поискавой системы для электроныых деталей |
|
RM0312 датащи(PDF) 153 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
RM0312 датащи(HTML) 153 Page - STMicroelectronics |
|
153 / 275 page ![]() DocID022352 Rev 3 153/275 RM0312 16-bit general purpose timer (TIM2/TIM3) 170 17.7.10 Capture/compare mode register 2 (TIMx_CCMR2) Note: Refer to Capture/compare mode register 1 (TIMx_CCMR1) for details on using these bits. Address offset: 0x09 Reset value: 0x00 Channel configured in output Bits 3:2 IC1PSC: Input capture 1 prescaler This bit-field defines the ratio of the prescaler acting on CC1 input (IC1). The prescaler is reset as soon as CC1E=’0’ (TIMx_CCER register). 00: no prescaler, capture is done each time an edge is detected on the capture input. 01: Capture is done once every 2 events. 10: Capture is done once every 4 events. 11: Capture is done once every 8 events. Note: The internal event counter is not reset when IC1PSC is changed on the fly. In this case the old value is used until the next capture occurs. To force a new value to be taken in account immediately, you can clear the CC1E bit and set it again. Bits 1:0 CC1S: Capture/Compare 1 selection This bit-field defines the direction of the channel (input/output) as well as the used input. 00: CC1 channel is configured as output. 01: CC1 channel is configured as input, IC1 is mapped on TI1FP1. 10: CC1 channel is configured as input, IC1 is mapped on TI2FP1. 11: Reserved Note: CC1S bits are writable only when the channel is OFF (CC1E= ’0’ in TIMx_CCER1 and updated). 7 654 3210 Reserved OC2M[2:0] OC2PE OC2FE CC2S[1:0] rw rw rw rw Bit 7 Reserved Bits 6:4 OC2M: Output compare 2 mode Bit 3 OC2PE: Output compare 2 preload enable Bit 2 OC2FE: Output compare 2 fast enable Bits 1:0 CC2S: Capture/Compare 2 Selection This bit-field defines the direction of the channel (input/output) as well as the used input. 00: CC2 channel is configured as output. 01: CC2 channel is configured as input, IC2 is mapped on TI2FP2. 10: CC2 channel is configured as input, IC2 is mapped on TI1FP2. 11: Reserved Note: CC2S bits are writable only when the channel is OFF (CC2E = ’0’ in TIMx_CCER1). |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |