Application setup

AN3992

14/22

Doc ID 022369 Rev 3

4.3

Software

4.3.1

ST Visual Develop

ST Visual Develop (STVD) provides an easy-to-use, efficient environment for start-to-finish

control of application development (from building and debugging the application code to

programming the microcontroller).

STVD is available on STM web site http://www.st.com/internet/evalboard/product/210567.jsp

4.3.2

Cosmic compiler

Cosmic is the compiler toolchain used by ST Visual Develop. There is a 1 year free license

limited to 32 Kbytes of code and data which requires registration.

For further information about the license, refer to the Cosmic Software website.

4.3.3

HyperTerminal

HyperTerminal is a program available on Windows OS that you can use to connect to other

computers, Telnet sites, bulletin board systems (BBSs), online services, and host

computers, using either your modem or a null modem cable.

4.4

Project

The project was built from MCD standard library which is included in the

STM8L15x_StPeriph_Driver

folder.

There are three steps to open the project:

1.

Launch ST Visual Develop.

2.

In the “File” menu, click on “Open WorkSpace”.

3.

Locate the project folder and select the CR95HF_STM8L.stw file.

The project folder has been organized as the project and follows the layer organization of

the libraries.

Figure 8.

Workspace organization