Quick start steps

UM0553

2/5

2

Quick start steps

1.

Change the network configuration of your PC.

Choose Start

> Settings > Control Panel > Network Connection. Right-click on Local Area

Connection, and choose Properties. Choose Internet Protocol (TCP/IP) and click on

Properties. Select Use the following IP address and enter 192.168.0.1 in the IP address

field as shown in Figure 2.

Figure 2.

Internet protocol (TCP/IP)

2.

Plug the Ethernet cable into your PC and the STR9 dongle.

3.

Connect the STR9 dongle into a USB port.

4.

Run browser and type in the following address: http://192.168.0.8/ (see Figure 3).