AN3342 datasheet(28/39 Pages) STMICROELECTRONICS

28 / 39 page

Setting up the STM8 development environment

AN3342

28/39

Doc ID 18461 Rev 3

11.2

Using the tools

Once the tools installation is complete, the ST visual develop (STVD) integrated

development environment can be launched.

The user then has the choice to generate either a new workspace with a new project or to

open an existing workspace. If using the STVD for the first time, it is recommended to open

an existing project from one of the STM8TL5x firmware libraries.

Note:

Even if you are not intending to use the library, an existing library project can be used as a

template to configure all the compiler options. Enter your own code after main().

The STM8TL5x standard peripheral firmware library includes several examples for each

peripheral plus one workspace containing a blank project which is ready to receive your C

code. It is located in the firmware subdirectory \Project\Examples (see Figure 15). You can

choose between STVD\Cosmic, STVD\Raisonance, RIDE, or EWSTM8.

The STM8TL5x STMTouch library provides all functions required for an easy and quick

development of your own touch sensing application, using the full set of STM8TL5x touch

sensing features. The STM8TL5x STMTouch library contains the touch sensing drivers

dedicated to the STM8TL5x and its ProxSense peripheral but also a set of examples

showing the STM8TL5x performances.

Figure 15.

STVD open example workspace

AN3342 датащи(PDF) 28 Page - STMicroelectronics