13/23

GETTING STARTED WITH RAISONANCE IDE FOR THE ST6 MICROCONTROLLER

Figure 16. Port A window

Figure 17 shows the window that will be displayed when you double-click on the Main Regis-

ters icon.

Figure 17. Main registers window

To watch the values of certain registers only, the address of the labels or the value of the pos-

sible variables, you have to open the Watch Window.

4.6 TIME FEATURE

If you want to determine the time spent for one or several instructions of your program, set

breakpoints at the first and last instruction. Run your program with the Run icon. It will stop at

the first breakpoint. Then select the Debug > Reset Time menu (you can also use the macro

Ctrl + T). The displayed time is reset. If you click on the Run icon again, it will display the time

spent executing the instructions.