µPD17P236

18

Data Sheet U14776EJ1V0DS00

Resonator

Recommended

Item

Conditions

MIN.

TYP.

MAX.

Unit

Constants

Ceramic

Oscillation frequency

1.0

4.0

8.0

MHz

resonator

Note 1

Oscillation

4

ms

stabilization time

Note 2

in oscillation voltage

range

Notes 1. The oscillation frequency only indicates the oscillator characteristics.

STOP mode release.

Caution To use a system clock oscillator circuit, perform the wiring in the area enclosed by the dotted

line in the above figure as follows, to avoid adverse wiring capacitance influences:

•

Keep wiring length as short as possible.

•

Do not cross a signal line with some other signal lines. Do not route the wiring in the vicinity

of lines through which a large current flows.

•

Always keep the oscillator capacitor ground at the same potential as GND. Do not ground the

capacitor to a ground pattern, through which a large current flows.

•

Do not extract signals from the oscillator.

External circuit example

R1

C2

C1

Remark

For the resonator selection and oscillator constant, customers are requested to either evaluate the

oscillation themselves or apply to the resonator manufacturer for evaluation.