 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
UM1811 датащи(PDF) 44 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
UM1811 датащи(HTML) 44 Page - STMicroelectronics |
|
|
44 / 52 page  Basic G3 operations UM1811 44/52 DocID026814 Rev 1 Figure 32. Configure Node 1 in TX For the Node 2, as shown in Figure 32, go into the PHY menu / PLME_Control panel (1) to configure the state of the node. Check the TXOFF_RXON (2) parameter and click on the PLME_SET_TRX_STATE.Request button (3). Figure 33. Configure Node 2 in RX Now that the boards are plugged in the mains and the setup has been completed, data can be sent at the PHY level, as represented in Figure 33. To do this, go to the PHY root menu of the Node 1. Select the payload type to be ASCII (1), write the “TEST” string in the free text area (2) and click on the PD_DATA.Request button (3). In the trace window, it is possible to check that the Node 2 has received the data message by checking that the PD_DATA.Indication message returned the SUCCESS status. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
