| поискавой системы для электроныых деталей |
|
UM0670 датащи(PDF) 40 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
UM0670 датащи(HTML) 40 Page - STMicroelectronics |
|
40 / 43 page ![]() UM0670 Design calculation Doc ID 15327 Rev 2 40/43 Power loss on the STPSC806D diode is: Equation 17 where forward diode voltage was found for the average diode current 0.8 A in the datasheet (see datasheet Section 11: References and related materials: 4.). Calculated junction diode temperature without using heat sink is: Equation 18 Junction-to-case thermal resistance is available in the datasheet for the STPSC806D and case-to-ambient temperature is determined by the device package used. In this case, the TO-220 package is used and its thermal resistance is typically 60 °C / W. Calculated junction diode temperature without using a heat sink is much lower than the maximum junction temperature for the STPSC806D, and therefore this diode is suitable for the design. One of the most important things to consider is proper inductor design. The inductor size was calculated in Equation 8, but generally the inductor size by itself is not enough to ensure proper inductor design and therefore several additional equations are used for completing overall inductor construction. First, the inductor core size must be selected and for this selection it is very helpful to calculate the minimum area product using application parameters. Minimum required core area product (AP), where the flux swing is limited by core saturation is: Equation 19 where the constant is Cl = JMAX x CR x 10 –4 = 420 x 0.5 x 10–4. The inductor core E25 from EPCOS was selected. The minimum core cross section is 51.5 mm2 and the winding cross section is 61 mm2 (see datasheet Section 11: References and related materials: 5.) and the calculated product area is: Equation 20 The calculated product area is bigger than the minimum required product area, and therefore the inductor core E25 can be used. P LOSS D I AVR D V F × 0.8 0.7 0.56W = × = = T J P LOSS D R thJC R thCA + () × T A 0.56 2.4 60 + () 30 65° C = + × = + = AP MIN Ll PEAK × l RMS × B MAX Cl × --------------------------------------------- ⎝⎠ ⎛⎞ 4 3 --- 1.6 10 3 – 1.4 1 × × × 0.3 420 0.5 10 4 – × × × ------------------------------------------------------------ ⎝⎠ ⎜⎟ ⎛⎞ 4 3 --- 0.2518cm 4 = = = AP A N A MIN 61 51.5 0 31415cm 4 , = × = × = |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |