Model. No.

Rev.

■

■

■

■

Precautions for use:

The shelf life of LEDs stored in the original sealed bag at <40

℃

and < 90% RH is 12 months. Baking is

Temperature profile

1. Storage

And soldering time no more than 2 seconds.

The epoxy resin of an SMD LED should not contact the tip of the soldering iron.

No mechanical stress should be exerted on the resin portion of an SMD LED during soldering.

frequently during the baking process.

2. Soldering

Model No.

：

：

：

：

FYLS-1210RGBC

Http://www.foryard.com

Before opening the packaging , check for air leaks in the bag.

baking is required Take the material out of the packaging bag before baking. Do not open the oven door

Use a soldering iron of less than 25 watts is recommended . The iron temperature must be kept below 315

℃

Handling of an SMD LED should be done only when the package has been cooled down to below 40

℃

(1) Manual soldering with a soldering Iron

secondary protection

(2)Reflow soldering

required if the shelf life has expired

A

FYLS-1210RGBC

To prevent moisture absorption into SMD LEDs during the transportation and storage , the LEDs are packed

SMD LEDs must be used within 24 hours. If the LEDs are not within 24 hours after removal from the bag ,

After the bag is opened, the SMD LEDs must be stored at <30

℃

and < 60% RH. Under these conditions,

in a moisture-barrier bag. Desiccants and a humidity indicator are packed together with the LEDs as

Peak temperature

Temperature

Pre-heat

Soak

Reflow

Cooling

Time

Melting-point