The information in this document is subject to change without notice. Before using this document, please

confirm that this is the latest version.

Not all devices/types available in every country. Please check with local NEC representative for

availability and additional information.

Bipolar Analog Integrated Circuit

SWITCHING REGULATOR CONTROL IC

Document No. G14309EJ1V0DS00 (1st edition)

Date Published July 1999 N CP(K)

Printed in Japan

DATA SHEET

1999

©

The

converters. This IC has 2 outputs employing a totem-pole circuit with peak output current 1.2 A, and is capable of

directly driving a power MOS-FET. As a result, it has been possible to realize primary side control of an active-clamp

type converter on a single chip.

Note It is necessary to obtain license from Vicor Corporation before using the

µPC1909 in an active-clamp type

circuit.

FEATURES

•

2 on-chip outputs; for Q and Q

•

Capable of directly driving a power MOS-FET

•

Drive supply voltage range: 7 V to 24 V

•

On-chip remote control circuit

•

On-chip pulse-by-pulse overcurrent protection circuit

•

On-chip overvoltage latch circuit

ORDERING INFORMATION

Part Number

Package

µPC1909CX

16-pin plastic DIP (300 mils)

µPC1909GS

16-pin plastic SOP (300 mils)