Obsolete

Product(s)

- Obsolete

Product(s)

Obsolete

Product(s)

- Obsolete

Product(s)

ELECTRICAL CHARACTERISTICS (continued)

RESET

Symbol

Parameter

Test Conditions

Min.

Typ.

Max.

Unit

Reset Low Threshold Voltage

4.7

V

Reset Threshold Hysteresis

50

100

200

mV

Reset Pulse Delay

µs

55

100

180

ms

Reset Reaction Time

1

10

50

µs

Reset Output LOW Voltage

0.4

V

Reset Output HIGH Leakage

1

µA

Delay Comparator Threshold

2.0

V

Delay Comparator Threshold

Hysteresis

100

mV

Note :

2 : Foldback characteristic

FUNCTIONAL DESCRIPTION

The L4937N is based on the SGS-THOMSON Mi-

croelectronics modular voltage regulator approach.

Several out-standing features and auxiliary func-

tions are provided to meet the requirements of sup-

plying the microprocessor systems used in automo-

tive applications.

Furthermore the device is suitable also in other ap-

plications requiring two stabilized voltages.

The modular approach allows other features and

functions to be realized easily when required.

STANDBY REGULATOR

The standby regulator uses an Isolated Collector

Vertical PNP transistor as the regulating element.

This structure allows a very low dropout voltage at

currents up to 50mA. The dropout operation of the

standby regulator is maintained down to 2V input

supply voltage. The output voltage is regulated up

to the transient input supply voltage of 40V. This fea-

ture avoids functional interruptions which could be

generated by overvoltage pulses.

The typical curve of the standby output voltage as

a function of the input supply voltage is shown in fig.

1.

The current consumption of the device (quiescent

current) is less than 250

µA when output 2 is dis-

abled (standby mode). The dropout voltage is con-

trolled to reduce the quiescent current peak in the

undervoltage region and to improve the transient

response in this region.

The quiescent current is shown in fig. 2 as a function

of the supply input voltage 2.

OUTPUT 2 VOLTAGE

The output 2 regulator uses the same output struc-

ture as the standby regulator, but rated for an output

current of 500mA.

The output 2 regulator works in tracking mode with

the standby output voltage as a reference voltage.

The output 2 regulator can be switched off via the

Enable input.

L4937N

5/9