Ordering Information:

MO290-RK-I5 ............Water Restoration Contractor Kit

Specifications subject to change without notice.

Copyright © 2009-2013 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form.

www.extech.com

6/12/13 - R1

Kit includes:

- Affordable InfraRed Camera with high quality image,

focus free viewing, and 5000 image miniSD card storage

- 80 x 80 pixel image resolution

- High 2% accuracy and 0.1°C thermal sensitivity

- 32 to 482°F (0 to 250°C) Temperature range

- Large 2.8" color LCD

- Focus free lens for convenient viewing

- Extremely lightweight (12 ounces) resulting in less user fatigue

- Includes QuickReport™ PC software for analysis of radiometric

images captured by camera

- Monitor moisture in wood and building materials with

virtually no surface damage

- Included Pin Probe, Hammer Probe, Deep Wall Probe,

and Base Board Probe for contact moisture readings

- Patented InfraRed Thermometer with laser pointer for

non-contact surface temperature measurement

- Built-in RH/Temperature probe measures Relative Humidity,

Air Temperaure, plus Grains Per Pound (GPP), Dew Point (DP),

and Vapor Pressure

- Measurement Ranges:

Pinless Moisture: 0 to 99% (limited by wood type)

Pin-type Moisture: 6 to 40% (Wood); 13 to 99% (Materials)

Temperature (Air): -4 to 140°F (-20 to 60°C)

Temperature (IR): -5 to 392°F (-50 to 200°C)

Humidity: 0 to 99%RH

Vapor Pressure: 0 to 20.0kPA

Datalogger + GPP (g/kg) Calculation

- Datalogs 16,000 RH and 16,000 Temperature readings

- User-programmable sampling rate and alarm thresholds

- USB interface for easy setup and data download using

the included software

provides protection and organization for the meters and

accessories whenever they are needed

Water Restoration Contractor Kit

MO290-P

Moisture Pin Probe

MO290-HP

Moisture Hammer Probe

MO290-EP

Moisture Extension Probe

MO290-BP

Moisture Baseboard Probe

Moisture Probes included:

A complete solution for the Restoration Contractor

Thermal imaging camera quickly locates areas of moisture in building materials.Use combination moisture

meter/thermal hygrometer to capture all ambient conditions as well as moisture levels in one meter. Includes essential

probes to measure moisture levels under baseboards, in between walls, and in hard wood and plywood subfloors. Use

USB Humidity/Temperature datalogger for GPP calculations