HTMS8201FTK datasheet(24/57 Pages) NXP

24 / 57 page

HTMS1x01_8x01

All information provided in this document is subject to legal disclaimers.

Product data sheet

COMPANY PUBLIC

Rev. 3.3 — 17 October 2014

152933

24 of 57

NXP Semiconductors

HTMS1x01; HTMS8x01

HITAG µ transponder IC

12.2 RWD waiting time before sending a subsequent request

• When the RWD has received a HITAG µ advanced/advanced+ response to a previous

request other than inventory and quiet, it needs to wait TFp2 before sending a

subsequent request. TFp2 starts from the time the last bit has been received from the

HITAG µ advanced/advanced+.

• When the RWD has sent a quiet request, it needs to wait TFp2 before sending a

subsequent request. TFp2 starts from the end of the quiet request's EOF (falling edge

of EOF pulse + 42

 T

C). This results in awaiting time of (150  TC + 42  TC) before

the next request.

The minimum value of TFp2 is TFp2min = 150  TC ensures that the HITAG µ

advanced/advanced+

ICs are ready to receive a subsequent request.

Remark: The RWD needs to wait at least 2.33 ms after it has activated the

electromagnetic field before sending the first request, to ensure that the HITAG µ

transponder ICs are ready to receive a request.

• When the RWD has sent an inventory request, it is in an inventory process.

12.3 RWD waiting time before switching to next inventory slot

An inventory process is started when the RWD sends an inventory request. For a detailed

explanation of the inventory process refer to Section 14.3 and Section 14.4.

To switch to the next slot, the RWD sends an EOF after waiting a time period specified in

the following sub-clauses.

12.3.1 RWD started to receive one or more HITAG µ transponder IC responses

During an inventory process, when the RWD has started to receive one or more HITAG µ

advanced/advanced+ transponder IC responses (i.e. it has detected a HITAG µ

advanced/advanced+ transponder IC SOF and/or a collision), it shall

• wait for the complete reception of the HITAG µ advanced/advanced+ transponder IC

responses (i.e. when a last bit has been received or when the nominal response time

TNRT has elapsed),

• wait an additional time TFp2 and then send an EOF to switch to the next slot, if a 16

slot anticollision request is processed, or send a subsequent request (which could be

again an inventory request).

TFp2 starts from the time the last bit has been received from the HITAG µ

advanced/advanced+ transponder IC.

The minimum value of TFp2 is TFp2min = 150  TC.

TNRT is dependant on the anticollisions current mask value and on the setting of the CRCT

flag.

HTMS8201FTK датащи(PDF) 24 Page - NXP Semiconductors

HTMS8201FTK датащи(HTML) 24 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57

датащи скачать

ссылки URL