LED15

3

www.PDUKE.com

2014/04/30

Note:

1.

Test by minimum input and constant resistive load.

2.

Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external

resistor between the Trim pin and either +Vout pin or -Vout pin.

3.

The power module operates in a variety of thermal environments; however, sufficient cooling should be provided to help ensure reliable

operation.

4.

The standard modules meet EN55022 Class A and Class B with external components. For further information, please contact with P-DUKE.

5.

An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.

The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V.

CAUTION: This power module is not internally fused. An input line fuse must always be used.

CHARACTERISTIC CURVE

LED15-48S05 Derating Curve

LED15-48S05 Efficiency vs. Input Voltage

LED15-48S05 Efficiency vs. Output Load

MECHANICAL DRAWING

DIP TYPE

SMT TYPE

PIN CONNECTION

EXTERNAL OUTPUT TRIMMING

1. All dimensions in inch (mm)

2. Tolerance :x.xx±0.02 (x.x±0.5)

x.xxx±0.01 (x.xx±0.25)

3. Pin pitch tolerance ±0.01 (0.25)

4. Pin dimension tolerance ±0.004(0.1)

PIN

DEFINE

1

+Vin

2

-Vin

3

Ctrl

4

+Vout

5

Trim

6

-Vout

Output can be externally trimmed by

using the method shown below.

6

5

TRIM UP

5

4

TRIM DOWN