 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
ML9058E датащи(PDF) 1 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
ML9058E датащи(HTML) 1 Page - List of Unclassifed Manufacturers |
|
|
1 / 76 page  LAPIS Semiconductor FEDL9058E-01 Issue Date: April. 13, 2007 ML9058E 132-Channel LCD Driver with Built-in RAM for LCD Dot Matrix Displays 1/76 GENERAL DESCRIPTION The ML9058E is an LSI for dot matrix graphic LCD devices carrying out bit map display. This LSI can drive a dot matrix graphic LCD display panel under the control of an 8-bit microcomputer (hereinafter described MPU). Since all the functions necessary for driving a bit map type LCD device are incorporated in a single chip, using the ML9058E makes it possible to realize a bit map type dot matrix graphic LCD display system with only a few chips. Since the bit map method in which one bit of display RAM data turns ON or OFF one dot in the display panel, it is possible to carry out displays with a high degree of freedom such as Chinese character displays, etc. With one chip, it is possible to construct a graphic display system with a maximum of 65 132 dots. The display can be expanded further using two chips. However, the ML9058E is not used in a multiple chip configuration when a line reversal drive is set. The ML9058E is made using a CMOS process. Because it has a built-in RAM, low power consumption is one of its features, and is therefore suitable for displays in battery-operated portable equipment. The ML9058E has 65 common signal outputs and 132 segment signal outputs and one chip can drive a display of up to 65 132 dots. FEATURES Direct display of the RAM data using the bit map method Display RAM data “1” ... Dot is displayed Display RAM data “0” ... Dot is not displayed (during forward display) Display RAM capacity 65 132 = 8580 bits LCD Drive circuits 65 common outputs, 132 segment outputs MPU interface: Can select an 8-bit parallel or serial interface Built-in voltage multiplier circuit for the LCD drive power supply Built-in LCD drive voltage adjustment circuit Built-in LCD drive bias generator circuit Can select frame reversal drive or line reversal drive by command Built-in oscillator circuit (Internal RC oscillator/external clock input) A variety of commands Read/write of display data, display ON/OFF, forward/reverse display, all dots ON/all dots OFF, set page address, set display start address, etc. Power supply voltage Logic power supply: VDD-VSS = 3.7 V to 5.5 V Voltage multiplier reference voltage: VIN-VSS = 3.7 V to 5.5 V (2- to 4-time multiplier available) LCD Drive voltage: VBI-VSS = 6.0 to 18 V Package: Gold bump chip (Bump hardness: Low, DV) : Gold bump chip (Bump hardness: High, CV) This device is not resistant to radiation and light. |
Аналогичный номер детали - ML9058E |
|
Аналогичное описание - ML9058E |
|
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
