Once the new UPS is up and running with all connections restored, set the switch back to the UPS setting to once again provide fully-conditioned UPS

power to connected equipment

TAA Compliant Version Available - Order Tripp Lite PDUB30TAA

Specifications

OVERVIEW

PDU Type

Hot-Swap

OUTPUT

Output Watt Capacity (watts)

2880

Output Capacity Details

2.9kW (120V input), 3.0kW (127V input), 2.4kW (100V input); 30A maximum (agency de-rated to 24A continuous)

Frequency compatibility

50 / 60 Hz

Output nominal voltage

100-127V nominal, single phase

Outlet quantity / type

6 NEMA 5-15/20R and 1 L5-30R outlets support critical connected loads; 1 designated pass-through L5-30R outlet

supports UPS L5-30P input plug

Outlet Type

NEMA 5-15/20R, L5-30R

INPUT

PDU Input Voltage

100; 120; 127

Maximum Input Amps (A)

24

PDU Plug Type

NEMA L5-30P

Input cord length details

Utility input cable (10 ft / 3m) / UPS input cable (6 ft / 1.8m)

Phase

Single-Phase

LEDS ALARMS & SWITCHES

Switches

Manual 2 position transfer switch offers fast switching between UPS and Utility operating modes in less than 6

milliseconds

Front panel LEDs

Lighted indicators confirm UPS and Utility switch position and operating mode

PHYSICAL

Shipping Dimensions (HWD/in)

9.25 x 20.23 x 6.1

Shipping Dimensions (HWD/cm)

23.5 x 51.4 x 15.5

Shipping weight (lbs)

11

Shipping weight (kg)

5

Unit Dimensions (HWD/in)

3.42 x 17.32 x 3.03

Unit Dimensions (HWD/cm)

8.7 x 44 x 7.7

Unit weight (lbs)

7.7

2 / 4