LP7512P70

Phone:

(408) 988-1845

http://

www.filss.com

Revised:

1/20/01

Fax:

(408) 970-9950

Email:

sales@filss.com

• ABSOLUTE MAXIMUM RATINGS

Parameter

Symbol

Test Conditions

Min

Max

Units

Drain-Source Voltage

4

V

Gate-Source Voltage

-2

V

Drain-Source Current

mA

Gate Current

2

mA

RF Input Power

50

mW

Channel Operating Temperature

175

ºC

Storage Temperature

—

-65

175

ºC

Total Power Dissipation

300

mW

Notes:

•

Operating conditions that exceed the Absolute Maximum Ratings could result in permanent damage to the device.

•

•

Absolute Maximum Power Dissipation to be de-rated as follows above 25

°C:

•

This PHEMT is susceptible to damage from Electrostatic Discharge. Proper precautions should be used when handling these

devices.

• HANDLING PRECAUTIONS

To avoid damage to the devices care should be exercised during handling. Proper Electrostatic

Discharge (ESD) precautions should be observed at all stages of storage, handling, assembly, and

testing. These devices should be treated as Class 1A (0-500 V). Further information on ESD control

measures can be found in MIL-STD-1686 and MIL-HDBK-263.

• APPLICATIONS NOTES & DESIGN DATA

Applications Notes are available from your local Filtronic Sales Representative or directly from the

factory.

Complete design data, including S-parameters, noise data, and large-signal models are

available on the Filtronic web site.