HCT-1000ProgrammableHandHeldConvectionTool

The HCT-1000 System is a fully programmable hand held convection rework tool that can both remove and

place SMT components. It features digital controls, internal or external thermocouple feedback control, pro-

gram storage of up to 50 profiles and integrated vacuum pick-up for component placement and removal.Addi-

tionally, with multiple modes of operation including manual, 4 zone heating, and as part of the MRS-1000

System, the HCT-1000 stands out as a versatile convection tool.

The hand-piece features vacuum and reflow buttons allowing the process to be

operated manually or automatically through a profile when used as part of the

Modular Rework System (MRS).Additionally, the vacuum has automatic lift off

of components, at the end of the removal profile, taking guesswork out of the

operators’ hands and improving process control.

As part of the MRS System, the HCT-1000 is connected via a cable to the

PCT-1000, and may be used withATH-1000Adjustable Tool Holder. In this

mode the HCT-1000 provides timing control for both units and theATH-1000

allows repeatable place and remove operations.

ATH-1000AdjustableToolHolder

TheATH-1000AdjustableTool Holder is designed to work with the HCT-1000 or

as part of the MRS-1000 System.The tool holder features a board holder, locking

hand-piece retainer, Z axis stop and mounting configurations for stand-alone

operation or integrated as part of the MRS-1000.TheATH-1000 is sturdy and

easy to attach to the PCT-1000 Programmable Preheater when incorporated into

the MRS System.

The4componentsbelowcanbepurchasedasacompletesystem(MRS-1000)orasseparateitems.

Youchoose.

HNSeriesNozzles

Aseries of 14 Nozzles are available for use with the

MRS-1000 / HCT-1000. The nozzles fit applications

reworking components of all sizes from (including,

but not limited to) BGAs, QFPs, LGAs, PLCC and

SOIC.Acustom nozzle program is also available.

11

22

ConfiguretheSystemtoyourNeeds.

TwoAdjustable Tool Holder models are available:

- The

ATH-1000A uses theAdvanced Head

Assembly which features 4” of Z axis adjustment,

½” fine adjustment of the X & Y axis as well as

30° θ adjustment.

- The

ATH-1000B uses the Basic Head assembly

and provides 4” of Z axis adjustment.

ATH-BASE can be ordered separately when the

ATH-1000 is used as a standalone unit.