19

UTG Series

Fibre optic contacts

The Fibre optic contacts are designed to accommodate:

• Plastic Optical Fibre (POF)

1 mm core and 2.2 mm jacket

• Plastic Clad Fibre (PCF)

230µm core and 2.2 mm jacket

Typical features and benefits are:

• Socket contact is spring loaded to avoid any air gap between the two optical faces.

• Low insertion loss is provided by high precision pieces.

• Single jumpers, multiway harness and active device housings can be supplied regarding customer requirement.

Performance

• Fibre type: ................................................................................................................................POF

• Wave length:........................................................................................................................650 nm

• Optical insertion loss (typ.): ..........................................................................................2 dB max.

• Jacketed external diameter:............................................................................................2.2mm

• Temperature range:....................................................................................................-25°C to +70°C

• Cable retention:..................................................................................................................... 49N

• Mating cycles without cleaning:.........................................................................................50

• Max. mating cycles:...............................................................................................................500

Construction

• Contact body: Copper alloy

Connector accommodation

UTP, UTS, UTG, UTO.

Description

Technical characteristics