PM1-Series – P6CUI-xxxxZ(H30)LF – Dual Separate Output – SIP7 - Plastic Case

Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.

Page 1/3

P6CUI-xxxxZ(H30)LF

All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified

Input Specifications

Voltage Range

± 10%

Input Filter

Capacitor

Input Reflected Ripple Current¹

20 mA pk-pk

Output Specifications

Voltage Accuracy

± 3%

Short Circuit Protection

Short Term

Line Regulation

± 1.2% / 1% Vin Change

± 10% (3.3 Vout Models: ± 20%)

75 mV pk-pk

Temperature Coefficient

± 0.02% / °C

General Specifications

Efficiency

See Table

I/O Isolation Capacity

60 pF, typ.

I/O Isolation Resistance

1000 MOhm

Switching Frequency

Humidity

95% rel H

> 1.121 Mhrs

Physical Specifications

Case Material

Potting Material

Weight

~ 2.3g, typ.

Environment Specifications

Operating Temperature

Maximum Case Temperature

100°C

Storage Temperature

-40 to +125°C

Cooling

RoHS Conform

Mainzer Straße 151–153

D-55299 Nackenheim

Tel. +49 6135 7026-0

Fax: +49 6135 931070

www.peak-electronics.de

peak@peak-electronics.de

The PM1 series P6CUI-xxxxZ(H30)LF is a family of cost effective 1 W dual

separate output DC/DC converters. These converters are in an ultra

miniature SIP7 case. Devices are encapsulated. High performance

features: 1000VDC up to 3000VDC input/output isolation, high efficiency

operation, output voltage accuracy of ±3% maximum, input range of ±10%

tolerance and low output ripple and noise.

PM1-SERIES

1 Watt

Unregulated

Dual Separate Output

SIP7 Case

1 - 3 kV DC I/O Isolation

Low Ripple and Noise

Rev.02-2009