SATA-Disk Module 4

APSDMxxxxX5AN-ACMXX

8

© 2012 Apacer Technology Inc.

Rev. 1.1

4.2 Environmental Specifications

Environmental specification of SDM4-M product family which follows the MIL-STD-202 and MIL-STD-810

standards is available as shown in Table 4-3.

Table 4-3 SDM4-M environmental specifications

Item

Specification

operating temp.

0~70℃ (standard); -40 ~ +85℃ (extended)

non-operating temp.

-40~100(℃)

humidity

10~95% R.H, non-condensing

operating vibration

10~2000(Hz), 15(G), sine wave, 1(hr)/per axis

non-operating vibration

20~2000(Hz), 7.7(Grms), random wave, 1(hr)/per axis

operating shock

50(G), 11(ms), half-sine wave

non-operating shock

1500(G), 0.5(ms), half-sine wave

Note: extended operating temperature specifications are only available for 4, 8, 16GB capacities.

4.3 Mean Time Between Failures (MTBF)

Mean Time Between Failures (MTBF) is predicted based on reliability data for the individual components

in SDM4-M. Although many component MTBFs are given in databases and often these values are not

really accurate, the prediction result for SDM4-M is more than 1,000,000 hours.

Notes about the MTBF:

The MTBF is predicated and calculated based on “Telcordia Technologies Special Report, SR-332, Issue

2” method.

4.4 Certification and Compliance

SDM4-M complies with the following standards:



CE – EN55022/55024



FCC 47CFR Part15 Class B



RoHS



MIL-STD-202 and MIL-STD-810



SATA II (SATA Rev. 2.6)



Up to ATA/ATAPI-7 ( including S.M.A.R.T.)