EA9777-3

Page 3

ELECTRONIC ASSEMBLY reserves

the right to change specifications

without prior notice. Printing and

typographical

errors

reserved.

QUICK START

1.) Installation

The evaluation board is conntected to a free USB-Port of

the PC with the delivered USB-cable.

Windows detects the new hardware. Drivers for all

supported different Windowsversions are

found on the CD in the folder: d:\drivers:

After successfully installing the driver, both

green LEDs (left and right) will shine.

The EVAL-Boards of the both TFT-displays

(EA

EVALeDIPTFT57

&

EA

EVALeDIPTFT70) do need an external

power supply. The supplied AC-adaptor

has to be plugged in. Once the EVAL-

Board is powered the green LED at the

bottom right is lit.

The next step is installing the EA KIT-editor and compiler of

eDIP-Series.

The setupfile

“setup LCD-Tools Portable“ is found in the root-directory of the

CD. Please follow the instructions of the installer.

2.) First-time operation of display

Mount your eDIP on the evaluation board. Make sure that it is

mounted correctly, pin 1 is placed in the lower left corner.

3.) Compile and flash the display

Run EA KIT-Editor and choose a project. To open a project, please go to the context menu: “File-

>open“ and select a file (*.kmc). During installation of KIT-Editor some examples are installed,

please find them under: <your drive>:\LCD Tools\Data\eDIP - intelligent graphic

displays\eDIP???\How to use\. Please

make sure to use the right folder, suitable

for your module. Please choose a

subject you are interested in and open

one of the project files.

To

compile

the

project

and download

it

onto

the

module only

one additional

click

is

needed. The

farest

right

icon ‘compile’

starts

compilation

and downloads the successfully compiled project automatically to the display.