UC3837

Preliminary

LINEAR INTEGRATED CIRCUIT

UNISONICTECHNOLOGIESCO.,LTD

6 of 11

www.unisonic.com.tw

QW-R103-069.A



OPERATION DESCRIPTION

The UC3837 devices integrate many useful designs into one controller for low-power switch-mode power

supplies. The following descriptions highlight some of the features of the UC3837 series.

Start-up Current

The start-up current is only 5μA. Low start-up current allows a start-up resistor with a high resistance and a

low-wattage to supply the start-up power for the controller. For AC/DC adaptor with universal input range design, a

dissipation solution.

Power-Saving Mode Operation

The proprietary Power-Saving Mode function provides linearly decreasing the switching frequency under

light-load conditions for higher efficiency. The feedback voltage, which is sampled from the voltage feedback loop, is

taken as the reference. Once the feedback voltage dropped below the threshold voltage, the switching frequency

starts to decrease. This Power-Saving Mode function dramatically reduces power consumption under light-load

conditions. The 22KHz minimum frequency control also eliminates the audio noise at any loading conditions.

At zero load condition, the magnitude of power loss is in proportion to the number of switching events within a

fixed period of time. Reducing switching events leads to the reduction on the power loss and thus conserves the

energy. The UC3837 enter burst mode at standby condition to minimize the switching loss and reduces the standby

power consumption. Power supplies using the UC3837 can easily meet even the strictest regulations regarding

standby power consumption.

Switch Frequency Set

operating. At no load or light load condition, most of the power dissipation in a switching mode power supply is from

switching loss on the MOSFET transistor, the core loss of the transformer and the loss on the snubber circuit. The

magnitude of power loss is in proportion to the number of switching events within a fixed period of time. So lower

switch frequency at lower load, which more and more improve IC’s efficiency at light load. At from no load to light