Product Data Sheet

3M™ Moisture Barrier Bag Dri-Shield 2000

Product Data Sheet

3

Electronic Solutions Division

Static Control Products

926 JR Industrial Drive

Sanford, NC 27332-9733

Toll-Free: 866-722-3736

International: 919-718-0000

Email: 3mstaticinfo@mmm.com

www.3Mstatic.com

Please recycle. Printed in USA.

© 3M 2013. All rights reserved.

98-0799-1139-6 JHA

Important Notice

All statements, technical information, and recommendations related to 3M’s products

are based on information believed to be reliable, but the accuracy or completeness is not

guaranteed. Before using this product, you must evaluate it and determine if it is suitable for

your intended application. You assume all risks and liability associated with such use. Any

statements related to the product which are not contained in 3M’s current publications, or

any contrary statements contained on your purchase order shall have no force or effect unless

expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for one year from the

time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT

LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE

. If this product is defective within the warranty period

stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M

product or refund the purchase price of the 3M product. Except where prohibited by law,

3M will not be liable for any indirect, special, incidental or consequential loss or damage

arising from this 3M product, regardless of the legal theory asserted.

3M is a trademark of 3M Company. All other trademarks are owned by their respective companies.

*

RoHS 2011/65/EU Compliant means that the product or part does not contain any of the substances in excess of the maximum

concentration values (“MCVs”) in EU RoHS Directive 2011/65/EU. The MCVs are by weight in homogeneous materials. This

information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party

suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information, then 3M’s entire liability and Buyer’s exclusive

remedy will be in accordance with the Warranty stated below.

**Lead-free means that the product has less than 2 ppm of lead when tested by ICP-AES, with reference to EPA method

3051A/3052.

• Standard sizes stocked for prompt shipment

(usually same day) .

• Width is measured from inside seam to inside

seam.

• Length is measured from the top edge to the

bottom fold.

• Opening is in the “width” dimension.

• Custom bag sizes, custom printing and custom

hot stamping are available.

• Most sizes are packed 100 per case.

• Small sizes are packed 500 or 1,000 per case.

Tolerance (inches): Width -0, +0.250

Length +/- 0.125 Offset 0 to 0.250

Seal width +/- 0.125

Dimensions

(W x L in.)

Part No.

Dimensions

(W x L in.)

Part No.

Dimensions

(W x L in.)

Part No.

3 x 5

70035

6 x 30

700630

12 x 18

7001218

4 x 6

70046

8 x 10

700810

14 x 30

7001430

4 x 24

700424

8 x 12

700812

15 x 18

7001518

5 x 30

700530

10 x 12

7001012

16 x 18

7001618

6 x 8

70068

10 x 20

7001020

17 x 19

7001719

6 x 10

700610

10 x 24

7001024

18 x 18

7001818

6 x 24

700624

10 x 30

7001030

18 x 24

7001824

12 x 16

7001216

Custom sizes and printing available.

Open Top Bag