OP27

Rev. F | Page 7 of 20

ABSOLUTE MAXIMUM RATINGS

Table 5.

Parameter

Rating

Supply Voltage

±22 V

Input Voltage1

±22 V

Output Short-Circuit Duration

Indefinite

Differential Input Voltage2

±0.7 V

Differential Input Current2

±25 mA

Storage Temperature Range

−65°C to +150°C

Operating Temperature Range

OP27A (J, Z)

−55°C to +125°C

OP27E, ( Z)

−25°C to +85°C

OP27E, (P)

0°C to 70°C

OP27G (P, S, J, Z)

−40°C to +85°C

Lead Temperature Range (Soldering, 60 sec)

300°C

Junction Temperature

−65°C to +150°C

equal to the supply voltage.

limiting resistors are not used in order to achieve low noise. If differential

input voltage exceeds ±0.7 V, the input current should be limited to 25 mA.

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

THERMAL RESISTANCE

specified for device in socket for TO, CERDIP, and PDIP

board for SO package.

Absolute maximum ratings apply to both DICE and packaged

parts, unless otherwise noted.

Table 6.

Package Type

Unit

TO-99 (J)

150

18

°C/W

8-Lead Hermetic DlP (Z)

148

16

°C/W

8-Lead Plastic DIP (P)

103

43

°C/W

8-Lead SO (S)

158

43

°C/W

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.