31

JKX Series

• Sealed IP 68 (mated connectors)

• Mechanically keyed : ensures correct polarization

and alignment.

• Contact arrangements : from 2 to 10 contacts.

• Wire gauge range from 28 AWG to 14 AWG.

• High contact density in a small space.

• Contact termination in either crimp, solder or

PCB contacts.

Part number system

M

S D S

C

M

05

G

1

FD

JKX

Basic series

Shell configuration

FD - ER - EP - PC

Size

0 - 1

Keying

G

Contact layouts

02 ---------- 10 (see page 33)

Contact type

M : pin

F : socket (in relation with keying)

Contact termination

C : crimp ; S : solder ; P* : straight PCB tails ; Q* : 90° PCB tails ; W : 0.7 mm clipped

solder

Material & surface plating

S : Outer shell in brass alloy with glossy chrome over nickel

N : Outer shell in brass alloy with black plating (consult us)

D : Obligatory suffix

S : Insulator in PPS

P : Insulator in Peek (for Ø 0.5 mm contacts only)

Obligatory suffix for layouts including contacts of Ø 0.5 mm

Options

M : Connector with backnut for protective boot (protective boot to order separately page 34)

G : Connector adapted to accomodate larger cables (Ø 4.5 to 6 in size 0 and Ø 6 to 8 in size 1)

R : Red dot (possible for FD, PC, ER only)

* For receptacles with female contacts only.

Key features

User advantages

Temporary immersion IP 68

6-collet cluster

Allows a wide range of cable diameter

applications for a single connector.

Reduces inventory variations.

Removable contacts

Crimp versions allow easier wiring and

maintenance.