www.austriamicrosystems.com/Audio/OpAmps/AS1713

Revision 1.03

12 - 16

AS1713

Datasheet - Application In form atio n

Note:

The absolute maximum ratings (see page 3) for power dissipation and output short-circuit duration (10s, max) must be adhered since

the output current can exceed 200mA (see Typical Operating Characteristics on page 6).

Shutdown

the amplifier. When exiting shutdown, there is a 6µs delay before the amplifier output becomes active.

Note:

Power-Up

The AS1713 typically settle within 5µs after power-up.

Power Supplies and Layout

The AS1713 can operate from a single 2.7V to 5.5V supply or from dual ±1.35V to ±2.5V supplies. Good design improves device performance

by decreasing the amount of stray capacitance at the op amp inputs/outputs.

For single-supply operation, bypass the power supply with a 0.1µF ceramic capacitor.

For dual-supply operation, bypass each supply to ground.

Decrease stray capacitance by placing external components close to the op amp pins, minimizing trace and lead lengths.

Figure 26. Rail-to-Rail Input / Output Range;

Ω

Figure 27. Rail-to-Rail Input / Output Range;

Ω

2µs/Div

2µs/Div