64GA106 datasheet(167/330 Pages) MICROCHIP

167 / 330 page

 2010 Microchip Technology Inc.

DS39905E-page 167

PIC24FJ256GA110 FAMILY

14.0

OUTPUT COMPARE WITH

DEDICATED TIMER

Devices in the PIC24FJ256GA110 family all feature

9 independent enhanced output compare modules.

Each of these modules offers a wide range of configu-

ration and operating options for generating pulse trains

on internal device events, and can produce

Pulse-Width Modulated (PWM) waveforms for driving

power applications.

Key features of the enhanced output compare module

include:

• Hardware-configurable for 32-bit operation in all

modes by cascading two adjacent modules

• Synchronous and Trigger modes of output

compare operation, with up to 30 user-selectable

trigger/sync sources available

• Two separate Period registers (a main register,

OCxR, and a secondary register, OCxRS) for

greater flexibility in generating pulses of varying

widths

• Configurable for single pulse or continuous pulse

generation on an output event, or continuous

PWM waveform generation

• Up to 6 clock sources available for each module,

driving a separate internal 16-bit counter

14.1

General Operating Modes

14.1.1

SYNCHRONOUS AND TRIGGER

MODES

By default, the enhanced output compare module oper-

ates in a free-running mode. The internal, 16-bit coun-

ter, OCxTMR, counts up continuously, wrapping

around from FFFFh to 0000h on each overflow, with its

period synchronized to the selected external clock

source. Compare or PWM events are generated each

time a match between the internal counter and one of

the Period registers occurs.

In Synchronous mode, the module begins performing

its compare or PWM operation as soon as its selected

clock source is enabled. Whenever an event occurs on

the selected sync source, the module’s internal counter

is reset. In Trigger mode, the module waits for a sync

event from another internal module to occur before

allowing the counter to run.

Free-running mode is selected by default, or any time

that the SYNCSEL bits (OCxCON2<4:0>) are set to

‘00000’. Synchronous or Trigger modes are selected

any time the SYNCSEL bits are set to any value except

‘00000’. The OCTRIG bit (OCxCON2<7>) selects

either Synchronous or Trigger mode; setting the bit

selects Trigger mode operation. In both modes, the

SYNCSEL bits determine the sync/trigger source.

14.1.2

CASCADED (32-BIT) MODE

By default, each module operates independently with

its own set of 16-Bit Timer and Duty Cycle registers. To

increase resolution, adjacent even and odd modules

can be configured to function as a single 32-bit module.

(For example, modules 1 and 2 are paired, as are

modules 3 and 4, and so on.) The odd-numbered

module (OCx) provides the Least Significant 16 bits of

the 32-bit register pairs, and the even module (OCy)

provides the Most Significant 16 bits. Wraparounds of

the OCx registers cause an increment of their

corresponding OCy registers.

Cascaded operation is configured in hardware by

setting the OC32 bits (OCxCON2<8>) for both

modules.

Note:

This data sheet summarizes the features of

this group of PIC24F devices. It is not

intended to be a comprehensive reference

source. For more information, refer to the

“PIC24F

Family

Reference

Manual”

Section 35. “Output Compare with

Dedicated Timer”

(DS39723)

64GA106 датащи(PDF) 167 Page - Microchip Technology

64GA106 датащи(HTML) 167 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL